Enkoder inkrementalny DFS60B-S4EB00500 1059346

Informacja PERFORMANCE
Pulses per revolution 500
Measuring step 90° electronically/ppr
Measuring step deviation at non binary number of lines ± 0.01°
Error limits ± 0.05°
Initialization time 40 ms
INTERFACES
Communication interface Incremental
Communication Interface detail HTL / Push pull
Number of signal channels 6-channel
ELECTRICAL DATA
Connection type Male connector, M23, 12-pin, axial
Operating current 40 mA
Power consumption ≤ 0.5 W (without load)
Supply voltage 10 ... 32 V
Load current ≤ 30 mA
Output frequency ≤ 600 kHz
Reference signal, number 1
Reference signal, position 90°, electric, logically gated with A and B
Reverse polarity protection ✔
Short-circuit protection of the outputs ✔ 1)
MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1)
MECHANICAL DATA
Mechanical design Solid shaft, face mount flange
Shaft diameter 10 mm
Shaft length 19 mm
Flange type / stator coupling Face mount flange
Weight 0.3 kg
Flange material Aluminum
Housing material Aluminum die cast
Start up torque 0.5 Ncm (+20 °C)
Operating torque 0.3 Ncm (+20 °C)
Permissible shaft loading radial/axial
80 N (radial)

40 N (axial)

Operating speed ≤ 9,000 min⁻¹ 1)
Moment of inertia of the rotor 6.2 gcm²
Bearing lifetime 3.6 x 10^10 revolutions
Angular acceleration ≤ 500,000 rad/s²
1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
AMBIENT DATA
EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating
IP67, housing side, male connector connection (according to IEC 60529) 1)

IP65, shaft side (according to IEC 60529)

Permissible relative humidity 90 % (condensation of the optical scanning not permitted)
Operating temperature range
–40 °C ... +100 °C 2)

–30 °C ... +100 °C 3)

Storage temperature range –40 °C ... +100 °C, without package
Resistance to shocks 70 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
1) With mating connector fitted.
2) Stationary position of the cable.
3) Flexible position of the cable.